P0317 Rough Road Hardware Not Present
OBD-II Trouble Code Technical Description
Rough Road Hardware Not Present
What does that mean?
This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles (VW, Ford, Audi, Buick, GM, etc.). Although generic, the specific repair steps may vary depending on make/model.
A P0317 trouble code belongs to the category of codes that include ignition system codes. The reason for that is that many times, the "rough road hardware" is actually an interpretation from sensors that have basically detected that the engine’s crankshaft moves in an unexpected manner.
The system of sensors and the vehicle’s PCM, or powertrain control module, can indicate rough terrain conditions. For example, the engine speed can be erratic when the vehicle is driven over really rough road or off-road conditions. This can cause the PCM to see it as an engine fault such as a misfire.
Some vehicles may have a road sensor, an accelerometer, or some may use a ABS wheel sensors and the Electronic Brake Control Module (EBCM) to help determine rough road conditions.
Regardless of the exact system used in your vehicle, if you get this trouble code, it means the PCM has detected a rough road condition that requires attention. Typically this code is only set after the readings are the same after multiple drives.
Symptoms
Most trouble codes trigger the check engine light (or MIL malfunction indicator light). For this P0317 DTC, the light is not illuminated. You may, however, have other warning lamps illuminated (traction control, ABS, etc.) or even have some engine misfires or rough running.
Causes
Potential causes for this code to set are:
Diagnostic and Repair Procedures
A good first step is to check for technical service bulletins (TSBs) that may apply to your year/make/model. If the issue is a known issue there may exist a bulletin to help with diagnosis and repair specific to your exact problem. That can save you time and money.
You should obtain a vehicle specific repair guide to help determine the exact type of rough road system your vehicle uses.
If you have other misfire, ABS, or other related codes, generally you should fix them first before proceeding to fix a P0317. Still, record all freeze frame data as it may be useful in all diagnosis.
If you have an accelerometer sensor on your vehicle, check the condition of the sensor, wiring, and connectors for any problems. Repair as required. Then, use a digital volt ohm meter (DVOM) to check the continuity, resistance and other electrical aspects according to manufacturers specification.
If possible, use an advanced scan tool to drive the vehicle over rough roads and monitor the sensor readings from appropriate sensors on the vehicle to determine if you can duplicate the issue to help narrow down where the problem lies.
Need help?
Let us fix your problem. You are most welcome our diagnosis experts have in most cases the knowledge and skills to find the cause of the error code p0317 and to solve the problems.
Make an appointment for diagnosis
"Delete Error Code Permanently, Disable DTC Error Code Function for p0317 in the ECU"
In extreme cases, we even have the option to permanently remove the specific DTC p0317 and disable the function of the specific error code in the ECU. All other fault code functions will then continue to work to protect the engine. This is different from clearing an error code with a diagnostic device. We have the option to permanently remove the function of the specific error code, so that it never comes back. Also emergency running that occurs on the specific error code can be solved in most cases.
Of course we prefer to first try to solve the cause of the error code, but sometimes the only solution is to permanently disable the DTC function of p0317.
